HP SureStore Tape 5000e and 5000eU Features and Specifications

The HP SureStore Tape 5000 provides reliable and cost-effective network backup. Your new tape drive provides the following key features: Reliable DAT technology Capacity of 4 gigabytes on a single DDS-1 tape (assuming a 2:1 data compression ratio) Built-in read-after-write verification for a high level of data integrity Compatibility with industry-standard DDS formats, allowing the use of low-cost media Internal head cleaner that helps prevent head clogging TapeAssure software to verify successful installation TapeAlert support for worry-free backup HP One-Button Disaster Recovery Hardware data compression increases data storage capacity and data transfer rate Low power consumption

Physical Specifications
Dimensions:	95 mm H x 116 mm W x 220 mm D (3.7 in x 4.5 in x 8.6 in)
Weight:	5000e: 2.2 kg (5.0 lbs) 5000eU: 1.95 kg (4.3 lbs) without power supply
Power Requirements
Tape 5000e: Tape 5000eU: Supply voltage:	0.5A maximum 0.8A maximum 100-240V AC, automatically detected, 50-60 Hz
Performance
Interface:	Narrow SCSI-2
Recording Format:	DDS-1 (DDS), DDS-DC
Media:	DDS (60 and 90 meter) Media Recognition System cartridges
Capacity:	4 GB on a 90m DDS-1 cartridge (assuming a data compression ratio of 2:1)
Sustained Transfer Rate:	Typically 1 MB/s with data compression
Burst Transfer Rate:	3 MB/s (asynchronous) 10.0 MB/s (synchronous)
Operating Limits
Temperature:	5°C to 40°C (41°F to 104°F)
Humidity:	20% to 80% RH, non-condensing
Maximum Wet Bulb Temperature:	26°C (79°F)
Altitude:	0 to 4600 m (0 to 15,000 ft)
Vibration:	0.21 g peak
Shock Survival:	5 g peak for 3 ms duration
Noise Level:	Less than 5.0 Bel sound power
Non-Operating Limits
Temperature:	-40°C to 70°C (-40°F to 158°F)
Humidity:	5% to 95% RH
Altitude:	0 to 15200 m (0 to 50,000 ft)
Vibration:	2.10 g rms
Shock Survival:	90 g for 3 ms duration
Safety and Electromagnetic Compatibility
CSA Certification to C22.2, No. 950 UL Listed to UL 1950 GS Mark EN60950 (IEC 950) NOM 1 NYCE FCC Class B Certified VCCI Class 2 C-TICK Approved (AS/NZS 3548) Class 1 LED product (IEC 825-1) CE Declaration of Conformity RRL Approved