ncd5, ncd6, ncd7, ncd8, ncd9, ncd10, ncd11, ncd12, ncd14, ncd16
The Xterminal configuration files are in /usr/lib/X11/ncd/configs/. For these Xterminals, the config files look like the following (file AC100705):
# ncd5 configuration file # # 172.16.7.5 = AC100705 # read /usr/lib/X11/ncd/configs/ncd_17 config-custom-file = "AC100705" ip-address-at-next-boot = 172.16.7.5 unit-name = "ncd5"
| Name | S/N | Ethernet Addr | IP Addr | Config File | Memory |
| Ncd5 | 00 00 A7 15 04 A8 | 172.16.7.5 | AC100705 | ||
| Ncd6 | 00 00 A7 15 04 9D | 172.16.7.6 | AC100706 | ||
| Ncd7 | 00 00 A7 15 04 | 172.16.7.7 | AC100707 | ||
| Ncd8 | 00 00 A7 15 04 | 172.16.7.8 | AC100708 | ||
| Ncd9 | 00 00 A7 15 04 2F | 172.16.7.9 | AC100709 | ||
| Ncd10 | 00 00 A7 15 04 | 172.16.7.10 | AC10070A | ||
| Ncd11 | 00 00 A7 15 04 | 172.16.7.11 | AC10070B | ||
| Ncd12 | 00 00 A7 15 04 | 172.16.7.12 | AC10070C | ||
| Ncd14 | 00 00 A7 15 04 | 172.16.7.14 | AC10070E | ||
| Ncd16 | 00 00 A7 15 04 | 172.16.7.16 | AC100710 |
| NV Ram Setup | |
| Keyboard: n-101, Monitor: 1152x900x72Hz, DPI: 100 | |
| Network - IP Parameters | |
| Get IP Addresses from: | NVRAM |
| Terminal IP Address | 172.16.7.16.5 |
| First Boot Host Address | 172.16.0.2 |
| Gateway IP Address | 172.16.0.1 |
| Subnet Mask | 255.255.0.0 |
| Broadcast IP Address | 172.16.255.255 |
| NCDnet Parameters | |
| Terminal NCDnet Address: | 0.0 |
| Host NCDnet Address: | 0.0 |
| Router NCDnet Address: | 0.0 |
Boot |
|
| Boot file: | Xncd |
| TFTP Boot Directory | [blank] | NFS Boot Directory | /usr/lib/X11/ncd/ |
| Config file | AC100705 |
| Unix config directory | [blank] |
| NCDnet config directory | [blank] |
| TFTP Order | 2 |
| NFS Order | 1 |
| MOP Order | Disabled |
| LOCAL Order | Disabled |
BIOS setup, use key sequence: nv l s quit se